Instructions on how to mount a Swann security camera SW-D-DODC to your wall or ceiling.

1. Once you have chosen the best position for the camera, switch the power to the camera off, and unplug the power lead from the camera.

2. When mounting the Outdoorcam camera to your ceiling or wall, make sure that you rotate the camera so that at the top of the camera lens is ‘up’, otherwise you will find that your pictures are displayed upside down.

3. Hold the camera base in the position you wish to fix it, and mark the holes with an appropriate pen or pencil. Once this is done, remove the stand and drill a hole with the appropriate drill bit for the material you are mounting your camera to and the screws or fasteners you are using.

4. Run the camera cable back to the TV/VCR, any holes that you drill need to be at least 9/16” (14mm) in diameter to allow the connectors to pass through.

5. Reconnect the power lead to the camera and switch the camera power back on.

6. Position the camera and firmly lock the stand into place. Do not over tighten or forcefully adjust the camera once it has been correctly positioned.

Click here for more information on Swann OutdoorCam™ Color Indoor/Outdoor Security Camera