|
|
CE Labs Cat5e Distribution Amplifier Receiver with Cable Length Equalizer
Item Condition: New
|
|
CEL1021
Description
Model CAT5RX High Performance Cat5 Audio/Video Distribution Receiver
Distribute high definition component or composite video and digital or left and right audio over extended distances using CAT5 wire. Use in conjunction with Model CAT5TX.
- Use in conjunction with Model CAT5TX
- Cable length equalizer for long distances
- Video continuity LEDs to ensure all signals are transmitting
- IR output
- Dimensions: 4-3/8" x 3-1/2" x 1"
- Weight: 1.95 lbs
- Power Requirement: External 9 or 10 volt AC @ 600mA with a (2.1mm center) Coaxial connector
- NOTE: Composite Video may be used for video security or with standard video monitors
Video Specifications: - Nominal Input Level: 1 Volt peak to peak
- Gain: 1 volt into 75 ohms (2 volts unterminated)
- Input Impedance: 75 ohms
- Output Impedance: 75 ohms
- Isolation port to port: >65dB
- Isolation out to input: >80dB
- Return loss: >30dB
- Video bandwidth: >50MHz (HDTV requires 37MHz min)
- Distance: 300 feet @ 1080i (500 feet with Cat6 cable)
- 3 Composite video signals may be substituted on the individual component video inputs (1000ft max)
Audio (Analog)- Nominal Input level: 1 volt peak to peak
- Gain: Unity (slightly reduced at max cable length)
- Input Impedance: 22k ohm
- Output Impedance: 1k ohm
- Frequency Response: 20hZ to 20kHz
- Signal to Noise: 80dB @ 1 volts out
Audio (Digital)- Supports standard SPDIF digital audio.
Customer Reviews
Write A Review
|
Shop with Confidence
|
|
|
|
|
|
|
|