Atlas™ 307-12 19” Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails (7 RU)
Keep A/V components, small servers, surveillance equipment, and other electronics off the floor, locked up tight, and easily accessible with the Atlas™ 307-12 stand-alone wall cabinet! This wall-mount cabinet is a great choice for both commercial and residential installs with safe (and sturdy) options that meet your customer’s needs. It can be installed with either left or right hand hinging, and everything you need for mounting is included!
The Atlas™ 300 Series wall cabinet has (3), 16-gauge CRS sections which include a 2” deep, solid-steel front door, and a 4 1/2” deep rear door. The center-section has a depth of 12” and has 7RU of panel space opening. Also, the 307-12 has electric-welded seams and miters which increase the cabinet’s overall bonding. The center section offers maximum reinforcement provisions, such as a uniquely designed center section guide plate that reduces potential sagging by distributing cabinet and equipment weight to the rear section.
Accessible Space Saver
This wall-mount cabinet protects equipment and saves valuable floor space. A wall-mount cabinet gives you the choice to place the cabinet at eye-level, and eliminates the need to bend down and rotate the rack to access your components. With the Atlas™ 307-12, all you need do is unlock the rack and swing the center enclosure away from the wall via super sturdy hinges on the rear section. A/V cabinets have never been so convenient!
The cabinet offers exceptional structural support and stability for components even when the cabinet is opened. The unit’s one-piece front and rear sections are strengthened with frame flanges on bottom, top, and sides. The center section is plug-welded, joining bottom and top panels to side panels, and the rear section has corner brace supports which bridge the back and side panel (hinge side) giving the back (mounted) panel extra reinforcement for tension relief.
An 11-gauge, 1 7/8" wide guide plate is mounted to the rear section’s bottom flange to provide a 3/4" lip for added support to the center section when the cabinet is open or closed. The plate also ensures that an equipment-weighted center section will close properly, by “guiding” alignment pins into respective holes. An optional caster for carrying the weight of the center sections is available (Atlas™ CT31A).
The solid-steel construction and front door lock insure your components are protected from unwelcome usage or burglary. The cabinet, and every element within, is fully enclosed for premium fortification.
Enclosures are equipped with provisions for custom cabinet mounting, wire management, equipment mounting, and structural support. The corner brace supports, which straddle the back and side panel of the rear section (hinge side), also feature round (1 1/4" diameter) wire access holes for harnessing excess wire.
Perforated vents, located on both sides (top and bottom) of the center section, provide ventilation for rack-mounted electronics. This is an especially important feature for enclosed cabinets.
What a Knockout!
The back panel arrays consists of (4) knockouts: (2) 1" (25mm) standard and (2) 1/2" (13mm) / 3/4" (19mm) concentric. The top and bottom flange arrays are comprised of (6) knockouts: (3) 1" (25mm) standard and (3) 1/2" (13mm) / 3/4" (19mm) concentric. That’s (16) total conduit knockouts!
Adjustable Rack Rails
The cabinet includes one pair of 12-gauge, adjustable front rack rails tapped 10–32, and manufactured to standard E.I.A. 1/2" spacing. Rails will accommodate any standard 19” shelving or component.
In the Box
Included: (1) Atlas™ 307-12 Fully Assembled Cabinet with (3) Cabinet Sections (Including a 2” Deep Solid-Steel Front Locking Door, a 12” Deep Center Section, and a 4 1/2” Deep Rear Section), One Pair of Adjustable 12-gauge E.I.A. Rack Rails, and Installation Hardware.